R
Do not use a bulb that has been dropped or
that has scratches on its glass tube.
The bulb could explode.
R
Only use bulbs in closed lamps which have
been designed for this purpose.
R
Only use spare bulbs of the same type and
with the prescribed voltage
R
Protect the bulbs from moisture when in
use.
If the new bulb still does not light up, consult
a qualified specialist workshop.
R
Have the LEDs and bulbs of the following
lamps changed at a qualified specialist
workshop:
-
the additional turn signals in the exterior
mirrors
-
the high-mounted brake lamp
-
LED daytime running lamps (Bi-Xenon
headlamps)
-
Bi-Xenon lamps (Bi-Xenon headlamps)
-
front fog lamps
If you require assistance changing bulbs, con-
sult a qualified specialist workshop.
Front bulbs
Overview of bulb replacement – bulb
types
The following bulbs can be replaced. Bulb
types can be found in the legend.
Vehicles with halogen headlamps
:
Turn signal: PY21W
;
Daytime running lamps: W21W
=
Low-beam headlamps: H7 55W
?
High-beam headlamps: H7 55W
A
Parking lamps/standing lamps: W5W
Vehicles with Bi-Xenon headlamps
:
Turn-signal: NAK 3457
Additional turn signals in the exterior mir-
ror (not for all-wheel-drive vehicles):
HPC 16WY
Low-beam headlamps and high-beam
headlamps/cornering lamp
Example (halogen headlamps)
X
Switch off the lighting system.
X
Open the hood (Y page 248).
X
Turn housing cover : in the direction of
the arrow and remove it.
100
Changing bulbs
Lights and windshield wipers
To Next Page
Loading...
