Froling P4 - Boiler Operation

Operating the system
Heating up the boiler
Page 24
B0430207 I
3
3.3 Heating up the boiler
NOT E
 Changing the factory settings for primary and secondary air can
have a negative effect on efficiency and emissions of the
system.
3.3.1 Switching on the boiler
 Turn on service switch, if installed.
 Press the key
Automatic mode
The heating system is controlled via the control system according
to the selected mode.
3.3.2 Controlling the boiler
Necessary control steps. Displaying or modifying parameters:
 See Chapter 4
3.3.3 Switching off the boiler
 Press and hold the key for 5 seconds
The boiler follows the shut-down program and switches to
“Burner OFF” status.
The combustion unit is switched off, the chamber delivery unit
and the active hydraulic system are active