Froling P4 - Spare Parts Information

Fröling Heizkessel- und Behälterbau Ges.m.b.H, Industriestrasse 12, A-4710 Grieskirchen Page 45
Tel +43 (0) 7248 606-0 Fax +43 (0) 7248 606-600 info@froeling.com www.froeling.com B0430207
5
Checking the draught controller flap and explosion flap
 Check the draught controller flap and explosion flap for ease of
operation
 Maximum permissible setting: 25 Pa
Ideal setting: 20 Pa
Clean the flue gas sensors
 Remove the insulating cover
 Loosen the wing screw and remove
the flue gas sensor
 Carefully wipe off the flue gas sensor
with a clean cloth
 Slide in the flue gas sensor and
secure it hand-tight
5.3 Spare parts
NOT E
Installing non-original parts voids the guarantee!
Only replace components or parts with original replacement parts
 Please refer to Froling Spare Parts List Pellet P4 - USA