Fröling Heizkessel- und Behälterbau Ges.m.b.H, Industriestrasse 12, A-4710 Grieskirchen Page 47
Tel +43 (0) 7248 606-0 Fax +43 (0) 7248 606-600 info@froeling.com www.froeling.com B0430207
6.3 Error messages at Boiler Control System
If a fault has occurred and has not yet been cleared:
Status LED (1) flashes red
A fault message is shown on the display (2)
An internal distinction is made between 2 types of message:
Boiler follows shutdown procedure
Boiler shuts down immediately, heating circuit controls
and pumps remain active
6.3.1 Procedure for fault messages
The procedure for a fault message as well as causes for faults and
procedure for troubleshooting are described in the operating instructions
of the boiler controls:
See the operating instructions for the Lambdatronic P 3200
6.3.2 Acknowledging a fault message
Trace and remove the fault and then:
Press the key
Status LED flashes green
To Next Page
Loading...
