Fronius CL - Replacing DC Filters

118
Replacing DC filters
Removing DC fil-
ters
Remove the lower right and left cover
plate by removing the TX 25 screws (1)
Disconnect the plug and ribbon cable (3) from the Snowball PC board
Disconnect lines (5) from the PC board ground fuse
Remove hose from holder (4)
Remove 8 TX25 screws (2) and the complete connection area unit
(1) (1)
WARNING! An electric shock can
be fatal. All AC and DC supply
lines must be de-energized.
1
(2)
(5)
(5)
(3)
(3)
(4)
(3) (2)
(2)
(2)
(2)(2)(2)
2
3
4
5