71
EN-US
Tools and measurement devices
General The "Tools and measurement devices" chapter contains an overview and a description of
all the tools needed to properly service the device. This includes the following tools:
- Required tools
- Measuring and inspection equipment
- Auxiliary materials
Required tools
and measurement
devices
- TX 20 Torx screwdriver
- TX 25 Torx screwdriver
- Flathead screwdriver
- Phillips screwdriver size 1
- Allen key size 2.5
- Allen key size 4
- Flat wrench size 8
- Flat wrench size 17
- Torque wrench with TX 20 and TX 25 bit
- Diagonal cutting pliers
- Multimeter
To Next Page
Loading...
