Fronius TPS 3200 MV - Remote Mounted Wire Feeder

13 SEP 12
/ Battery Charging Systems / Welding Technology / Solar Electronics
Weld System
Data
Control Voltages
Welding Current
Shielding Gas
Wire
Coolant Lines
Remote Mounted Wire Feeder
Remote Mounted Wire FeederRemote Mounted Wire Feeder
Remote Mounted Wire Feeder
The wire feeder is placed between the welder and the torch location. This placement may or may not be permanent.
This configuration allow for:
 Varying distances between the power source and wire feeder.
 Enables the wire feeder to torch end distances to be reduced which can reduce the need for a push/pull system.
 The wire feeder can be kept within a restricted area while the welder is easily accessible for parameter
monitoring and changes.
Data
Control Voltages
Welding Current
Coolant Lines
-
--
- 5
5 5
5 -
--
-
Configurations