13 SEP 12
/ Battery Charging Systems / Welding Technology / Solar Electronics
Error Codes
Error CodesError Codes
Error Codes
- Few error codes refer directly to a problem with the torch. However, a large
number of them can indirectly be caused by the torch or the torch position.
Physical Clues
Physical CluesPhysical Clues
Physical Clues
- The torch neck needs to be inspected for excessive wear or damage
caused by the welding process. As needed, it should be cleaned of build-
up spatter and other contaminates.
- Consumables should be checked regularly and cleaned/changed as
needed. Consumables include
Gas Nozzle: free of spatter build-up and excessive conal damage.
Torch Tip: free spatter build-up and excessive wire wear.
Spatter Guard: gas holes free of blockage and excessive part
damage
Nozzle Stock: gas holes free of blockage, excessive spatter build-
up, and stripped threads.
- Ensure pressure and drive rolls (if equipped⁄ are clean and not excessively
worn or damaged.
Electronics/Settings
Electronics/SettingsElectronics/Settings
Electronics/Settings
- Some problems with the torch can be addressed by 1
st
level welding
settings in the power source.
Troubleshooting
Torches
-
--
- 89
89 89
89 -
--
-
To Next Page
Loading...
