13 SEP 12
/ Battery Charging Systems / Welding Technology / Solar Electronics
Troubleshooting
-
--
- 90
90 90
90 -
--
-
Wire Feeder Error Codes
EFD 1.x through 7.x
These are all internal logic errors and require a software update or SR board change
EFD 7.1
Configuration Memory (config mem) error
EFD 8.x
Main motor or push pull motor current errors
EFD 9.x
Main motor voltage errors
EFD 10.x
Internal logic errors between the SR-xx and the PM-xx board
EFD 11.x
Main motor and push pull motor alignment errors
EFD 12.x
Main motor and push pull motor movement errors (not to be confused with encoder errors)
EFD 15.x
Wire buffer errors (CMT, only active when welding)
EFD 30.x
Local High Speed Bus (LHSB) communication error
EFD 31.x
Encoder feedback errors.