Fuji Electric Monitouch V9 Series - Kz Series Link

5-2 5. KEYENCE
5.1.1 KZ Series Link
Communication Setting
Editor
Communication setting
(Underlined setting: default)
PLC
Port 1
Operation mode setting switch (SET A)
Communication parameter setting switch (SET B)
Item Setting Remarks
Connection Mode
1 : 1
/ 1 : n / Multi-link2 /
Multi-link2 (Ethernet) /
1 : n Multi-link2 (Ethernet)
Signal Level RS-232C
/ RS-422/485
Baud Rate 4800 / 9600 / 19200
/ 38400 bps
Data Length 7
/ 8 bits
Stop Bit 1 / 2
bits
Parity None / Odd / Even
Targe t Port No. 0 to 9
SET A Item Setting
A1
Port 1
OFF
Link mode
A2 ON
SET B Item Setting Remarks
B1
Baud rate
Common to Port 1 and 2
B2
B3
B4 Bit length
OFF: 7 bit
ON: 8 bit
B5
Parity
check
B6
B7 Stop bit
OFF: 1 bit
ON: 2 bit
B8 System reserve Fixed to OFF
1234
ON
SET A
A1 A2 A3 A4
1234
56
ON
78
SET B
B1 B2 B3 B4 B5 B6 B7 B8
B1 B2 B3 Baud Rate
OFF ON OFF 4800 bps
ON ON OFF 9600 bps
OFF OFF ON 19200 bps
OFF ON ON 38400 bps
B5 B6 Parity
OFF OFF None
ON OFF Odd
ON ON Even