Fuji Electric Monitouch V9 Series - Serial Connection

2.1 Temperature Controller/Servo/Inverter Connection 2-1
2.1 Temperature Controller/Servo/Inverter Connection
Serial Connection
X-SEL Controller
Robo Cylinder
*1 Use the IAI’s RS-485 conversion adaptor “RCB-CV-MW” and IAI’s external device communication cable “CB-RCA-SIO020 (050)”.
*2 Use the IAI’s SIO converter “RCB-TU-SIO-A/B”.
PLC Selection on
the Editor
Model Port Signal Level
Connection
Lst File
CN1 MJ1/MJ2
X-SEL Controller
Orthogonal
XSEL-K
XSEL-KE
XSEL-KT/KET
HOST port RS-232C Wiring diagram 1 - C2 Wiring diagram 1 - M2
IAI-XSEL.Lst
Scalar XSEL-KX
Orthogonal
XSEL-J
XSEL-P
XSEL-Q
TP port RS-232C Wiring diagram 2 - C2 Wiring diagram 2 - M2
Scalar
XSEL-JX
XSEL-PX
XSEL-QX
PLC Selection on the
Editor
Model Port Signal Level
Connection
Lst File
CN1 MJ1/MJ2
ROBO CYLINDER
(RCP2/ERC)
RCP2
ERC
SIO
RS-485 Wiring diagram 1 - C4 Wiring diagram 1 - M4
IAI_ROBO.Lst
RS-232C
Wiring diagram 3 - C2
*1
Wiring diagram 3 - M2
*1
Wiring diagram 4 - C2
*2
Wiring diagram 4 - M2
*2
ROBO CYLINDER
(RCS/E-CON)
RCS
E-CON
PORT IN
RS-485 Wiring diagram 1 - C4 Wiring diagram 1 - M4
IAI_ROBO.Lst
RS-232C
Wiring diagram 3 - C2
*1
Wiring diagram 3 - M2
*1
Wiring diagram 4 - C2
*2
Wiring diagram 4 - M2
*2
PCON/ACON/SCON
(MODBUS RTU)
PCON
ACON
SCON
SIO
RS-485 Wiring diagram 1 - C4 Wiring diagram 1 - M4
IAI_PCON.Lst
RS-232C
Wiring diagram 3 - C2
*1
Wiring diagram 3 - M2
*1
Wiring diagram 4 - C2
*2
Wiring diagram 4 - M2
*2