8-8 8. LS
8.1.5 GLOFA GM Series CPU
Communication Setting
Editor
Communication setting
(Underlined setting: default)
PLC
No particular setting is necessary on the PLC.
The following settings are fixed; baud rate: 38400 bps, data length: 8 bits, without parity, and stop bit: 1 bit.
Calendar
This model is not equipped with the calendar function. Use the built-in clock of the V series.
Available Device Memory
The contents of “Available Device Memory” are the same as those described in “8.1.3 GLOFA CNET”.
Item Setting Remarks
Connection Mode 1 : 1
/ Multi-link2 / Multi-link2 (Ethernet)
Signal Level RS-232C
/ RS-422/485
Baud Rate 38400
bps
Data Length 8
bits
Stop Bit 1
bit
Parity None
Targe t Port No. 0 to 31
To Next Page
Loading...