Fuji Electric Monitouch V9 Series - Xgt;Xgk Series Cnet

8-10 8. LS
8.1.7 XGT/XGK Series CNET
Communication Setting
Editor
Communication setting
(Underlined setting: default)
PLC
Set parameters using “XG_PD”. For more information, refer to the PLC manual issued by the manufacturer.
Communication setting
(Underlined setting: default)
Calendar
This model is equipped with a calendar function; however, the calendar data cannot be written from the V series. Thus, time
correction must be performed on the PLC side.
Item Setting Remarks
Connection Mode
1:1
/ 1:n / Multi-link2 /
Multi-link2 (Ethernet) /
1:n Multi-link2 (Ethernet)
Signal Level RS-232C
/ RS-422/485
Baud Rate
4800 / 9600
/ 19200 / 38400 /57600 /
115200 bps
Data Length 7 / 8
bits
Stop Bit 1
/ 2 bits
Parity None
/ Odd / Even
Targe t Port No. 0
to 31
Item Setting Remarks
Type RS-232C
/ RS-422
Speed
4800 / 9600
/ 19200 / 38400 /57600 /
115200 bps
Data bit 7 / 8
bits
Stop Bit 1
/ 2 bits
Parity None
/ Odd / Even
Station 0
to 31