Fuji Electric Monitouch V9 Series - Page 166

7.1 PLC Connection 7-15
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
Device Memory TYPE Remarks
R(data register) 00H
I(input) 01H
Q(output) 02H
M (internal relay) 03H
S(stage) 04H
GI (link input) 05H
GQ (link output) 06H
T(timer/contact) 07H
C (counter/contact) 08H