8-2 8. LS
8.1.1 MASTER-KxxxS
Communication Setting
Editor
Communication setting
(Underlined setting: default)
PLC
No particular setting is necessary on the PLC.
Calendar
Although this model is equipped with the calendar function, the V series cannot read and write to the calendar. Use the
built-in clock of the V series.
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
Item Setting Remarks
Connection Mode 1 : 1
/ Multi-link2 / Multi-link2 (Ethernet)
Signal Level RS-232C
Baud Rate
9600 / 19200 / 38400
/ 57600 / 76800 /
115200 bps
Data Length 8
bits
Stop Bit 1
bit
Parity None
Device Memory TYPE Remarks
P (input/output relay) 00H Input relay: read only
M (auxiliary relay) 01H
L (link relay) 02H
K (keep relay) 03H
F (special relay) 04H Read only
T (timer/current value) 05H
C (counter/current value) 06H
D(data register) 07H
TC (timer/contact) 09H
CC (counter/contact) 0AH
To Next Page
Loading...