9.1 PLC Connection 9-13
PLC
PC parameter
Make the I/O assignment setting for the Ethernet unit.
Network parameter (Ethernet)
Port No.
There are two types of ports: one is opened automatically by “auto-open UDP port” (default: 5000 DEC), and the other is
opened by open processing.
For more information, refer to the corresponding PLC manual.
Item Setting Remarks
Network type Ethernet
For more information, refer to the manual of the
PLC.
Station I/O No.
Make settings in accordance with the network
environment.
Network No.
Group No.
Station No.
IP address (DEC)
To Next Page
Loading...