9-28 9. MITSUBISHI ELECTRIC
Available Device Memory
The available setting range of device memory varies depending on the PLC model. Be sure to set within the range available for
the PLC to be used. Use [TYPE] when assigning indirect device memory for macro programs.
Device Memory TYPE Remarks
D(data register) 00H
W(link register) 01H
R (file register) 02H
TN (timer/current value) 03H
CN (counter/current value) 04H
M(internal relay) 06H
L (latch relay) 07H
B (link relay) 08H
X(input) 09H
Y(output) 0AH
TS (timer/contact) 0BH
TC (timer/coil) 0CH
CS (counter/contact) 0DH
CC (counter/coil) 0EH
SD (special register) 10H
SM (special relay) 11H
SB (special link relay) 12H
SW (special link register) 13H
ZR (file register (for continuous access)) 14H
F (annunciator) 15H
SS (totalizing timer/contact) 16H
SC (totalizing timer/coil) 17H
SN (totalizing timer/current value) 18H
Z (index register) 19H
To Next Page
Loading...