13.1 PLC Connection 13-7
CPM2A
Communication condition setting switch
PLC system setting
CPM1A/CPM2C
Communication port function setting switch (only for CPM2C)
PLC system setting (peripheral port)
Communication
Condition Setting Switch
Setting Contents
OFF
The peripheral port and RS-232C port are operated according to the
communication protocol and communication format set on the PLC system setting.
Item Setting Remarks
User Setting Checked
The system setting can be made by specifying a value for the
address using a programming console.
For more information, refer to the PLC manual issued by the
manufacturer.
Baud Rate 4800 / 9600 / 19200
Parameter 1, 7, 2, E
Mode Host link
Unit No. 00
Communication Port
Function Setting Switch
Setting Contents
OFF
The RS-232C port is operated according to the communication protocol and
communication format set on the PLC system setting.
Item Setting Remarks
User Setting Checked
The system setting can be made by specifying a value for the
address using a programming console.
For more information, refer to the PLC manual issued by the
manufacturer.
Baud Rate 4800 / 9600 / 19200
Parameter 1, 7, 2, E
Mode Host link
Unit No. 00
To Next Page
Loading...