Fuji Electric Monitouch V9 Series - Page 416

15.2 Temperature Controller/Servo/Inverter Connection 15-55
Writing of
barcode print
condition
RSS-14 Expanded
Stacked
1 to 8
(PLC1 to 8)
n+16 to n+17
Tilting angle
-18000 to +18000: -180.00 to +180.00 deg
20
n+18 Laser power correction: 0 to 200%
n+19 Scan speed correction: 5 to 500%
Composite
1 to 8
(PLC1 to 8)
n Station number: 0 (fixed)
19
n+1 Command: ACH
n+2 Barcode number: 0 to 7
n+3 Area number: 0 to FH
n+4
Type
CC-A composite
46: JAN/UPC
47: UCC/EAN128
48: JAN/UPC with 1D human-readable string
49: UCC/EAN128 with 1D human-readable string
CC-B composite
56: JAN/UPC
57: UCC/EAN128
58: JAN/UPC with 1D human-readable string
59: UCC/EAN128 with 1D human-readable string
CC-C composite
67: UCC/EAN128
69: UCC/EAN128 with 1D human-readable string
n+5
Human-readable string
0: Without human-readable string
2: With human-readable string
n+6
Inversion
0: Invalid
1: Valid
n+7 to n+8
Barcode
1-stack
height
LP-430U/430TU/420S9U/420S9TU/
410U/410TU
001000 to 110000:
001.000 to 110.000 mm
LP-431U/431TU/421S9U/421S9TU/
411U/411TU
001000 to 055000:
001.000 to 055.000 mm
LP-435U/435TU/425S9U/425S9TU
001000 to 160000:
001.000 to 160,000 mm
n+9
Narrow element width
0050 to 1000: 0.050 to 1.000 mm
n+10 to n+11 X position
LP-430U/430TU/420S9U/420S9TU/
410U/410TU
-55000 to +55000:
-055.000 to +055.000 mm
LP-431U/431TU/421S9U/421S9TU/
411U/411TU
-27500 to +27500:
-027.500 to +027.500 mm
LP-435U/435TU/425S9U/425S9TU
-80000 to +80000:
-080.000 to +080.000 mm
n+12 to n+13 Y position
n+14 to n+15
Tilting angle
-18000 to +18000: -180.00 to +180.00 deg
n+16
Ratio quiet zone/narrow element
000 to 200: 00.0 to 20.0
n+17 Laser power correction: 0 to 200%
n+18 Scan speed correction: 5 to 500%
Barcode print
data (2-byte
characters)
Reading of
barcode print
data
1 to 8
(PLC1 to 8)
n Station number: 0 (fixed)
4
n+1 Command: 2DH
n+2 Barcode number: 0 to 7
n+3 Set row number (2-D code): 1 to 9
n+4 to n+33 Print data
Writing of
barcode print
data
1 to 8
(PLC1 to 8)
n Station number: 0 (fixed)
4 + print
data word
count
(30 words
maximum)
n+1 Command: ADH
n+2 Barcode number: 0 to 7
n+3 Set row number (2-D code): 1 to 9
n+4 to n+33 Print data
Contents F0 F1 (= $u n) F2