15.2 Temperature Controller/Servo/Inverter Connection 15-61
Processing
element
setting
Writing of
processing
element setting
(arc)
1 to 8
(PLC1 to 8)
n+17 to n+18
Dashed
line: dash
length
LP-430U/430TU/420S9U/420S9TU/
410U/410TU
000010 to 110000:
000.010 to 110.000 mm
LP-431U/431TU/421S9U/421S9TU/
411U/411TU
000010 to 550000:
000.010 to 055.000 mm
LP-435U/435TU/425S9U/425S9TU
000010 to 160000:
000.010 to 160.000 mm
21
n+19 to n+20
Dashed
line: space
length
LP-430U/430TU/420S9U/420S9TU/
410U/410TU
000000 to 110000:
000.000 to 110.000 mm
LP-431U/431TU/421S9U/421S9TU/
411U/411TU
000000 to 550000:
000.000 to 055.000 mm
LP-435U/435TU/425S9U/425S9TU
000000 to 160000:
000.000 to 160.000 mm
Guide LD display
1 to 8
(PLC1 to 8)
n Station number: 0 (fixed)
3
n+1 Command: B2H
n+2
Display
0: Display stop
1: Center + print area
2: Print image
3: Dual pointer
Week setting
Reading of week
setting
1 to 8
(PLC1 to 8)
n Station number: 0 (fixed)
2
n+1 Command: 33H
n+2
Update day of the week
0: Sunday (updated at 0:00 midnight)
1: Monday (updated at 0:00 midnight)
n+3
The first week
0: The week including and after January 1
1: The week including the first Thursday of January
Writing of week
setting
1 to 8
(PLC1 to 8)
n Station number: 0 (fixed)
4
n+1 Command: B3H
n+2
Update day of the week
0: Sunday (updated at 0:00 midnight)
1: Monday (updated at 0:00 midnight)
n+3
The first week
0: The week including and after January 1
1: The week including the first Thursday of January
Contents F0 F1 (= $u n) F2
To Next Page
Loading...