1-50 1. Overview
Network table
This is an area for registering IP addresses of the MONITOUCH, PC and other devices.
Select [System Setting] [Ethernet Communication] [Network Table] and register.
Double-click a number in the No. column to display the [Network Table Setting] dialog. An IP address and other items can be
registered.
*1 For more information on each setting item, see “ Basics of ethernet settings” (page 1-51).
*2 Invalid if V9 units or PCs at other ports are registered. Only valid when set as the local port IP of the V9 unit.
Item Contents
Port Name Set the name of the V9 or the computer.
IP Address
*1
Set the IP address of the V9 or the computer.
Send Timeout
*2
Specify the timeout time to send the EREAD/EWRITE/SEND/MES command.
Port No.
*1
Set the port number of the V9 or the computer.
Retrials
*2
0 to 255
Set the number of retrials to be performed when a time-out occurs.
Device Protect
*2
Internal Device
Memory Card Device
Check either check box to write-protect the device memory from computers or other stations.
Default Gateway
*1 *2
Set the default gateway.
Subnet Mask
*1 *2
Set the subnet mask.
To Next Page
Loading...