3 Copy
106
Copy
3
îš„ Tray1 to 4, and Tray 6
Allows you to directly select the desired tray.
Note • Trays 3, 4, and 6 are optional.
îš„ Tray 5 Bypass Auto Detect
Automatically detects the size of paper loaded in the bypass tray.
Checking the Remaining Amount of Paper in the Paper Tray
The icon displayed in a tray allows you to check the remaining amount of paper loaded in
the tray.
Reduce/Enlarge (Making Enlarged/Reduced Copies)
This feature allows you to select a copy ratio to enlarge or reduce the size of copies.
1 Select [Reduce/Enlarge].
2 Select a copy ratio.
îš„ 100%
Copies at the same image size as the original
document.
îš„ Auto %
Automatically determines the copy ratio based
on the document size and the paper size
specified in [Paper Supply], and copies the document to fit into the paper.
Note • This cannot be selected together with [Auto Select] under [Paper Supply].
îš„ Ratios
Allows you to select from preset copy ratios.
: Indicates that the remaining amount of paper is 25 to 100%.
: Indicates that the remaining amount of paper is 25% or less.
: Indicates that the tray has run out of paper, or no paper is loaded in the tray.
You can view the icons to check the
remaining amount of paper in a tray.
To Next Page
Loading...
Need help?
General
