3 Copy
148
Copy
3
If you enable the Watermark Effect feature, the text strings specified in [Control Number],
[Stored Watermarks], [User Account Number], [Date & Time], and [Serial Number] on the
[Watermark] screen are embedded in the background of each copy. When you copy a
document that has been copied with Watermark Effect, the text embedded in the
background is printed as embossed or outline text depending on the option you select on
the [Watermark Effect] screen.
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
1 Select any option.
îš„ Off
Prints the text specified in [Stored Watermarks]
as it is.
îš„ Embossed
When you copy a document that has been
copied with Watermark Effect, the text
embedded in the background of the copy is printed as embossed text.
îš„ Outline
When you copy a document that has been copied with Watermark Effect, the text
embedded in the background of the copy is printed as outline text.
You can specify the size, density, and other settings for the text to be printed with Watermark in the System Administration
mode. For more information, refer to "5 Tools" > "Common Service Settings" > "Watermark" in the Administrator Guide.
Secure Watermark (Managing Document Security)
Secure Watermark is a security management feature to embed a copy protection digital
code into a document, to restrict the document to be duplicated. The digital code enables
you to analyze "when", "from which machine", and "by whom" the document was output.
Important • This feature is only supported on Fuji Xerox manufactured machines that are compatible to Secure
Watermark.
• The copy protection of a document, the analysis function of digital codes, and the restrictive effect
of hidden text using the Secure Watermark feature is not warranted to always function. The feature
may not function depending on the document or settings. For more information, contact our
Customer Support Center.
• We assume no responsibility for a damage caused by using or not being able to use the Secure
Watermark feature.
• Using the Secure Watermark feature may degrade print quality as follows:
- Colors may become darker.
- Text in documents may become hard to read.
- Dots such as decimal characters and periods may become hard to read.
• The Secure Watermark feature may not work properly for a document if its size is smaller than A5, if
its background color is not white, or if the Watermark or Secure Watermark feature has already been
used for the document.
• In some cases, a document may not be printed even if the Secure Watermark feature has not been
used for the document. This happens because the machine incorrectly detects a copy protection
code from the document. In that case, ask the system administrator to temporarily disable [Secure
Watermark Detection] for copy protection codes.
• If a layout template is specified in [Apply Layout Template to Copy/Print Jobs] under [Force
Annotation] in the System Administration mode, an embedded copy protection code is overlapped
with the text on the layout template. For information on [Force Annotation], refer to "5 Tools" >
"Common Service Settings" > "Force Annotation" in the Administrator Guide.
• Analyzing output paper allows the system administrator to grasp the identification information of
the user who requested the job. Note that we assume no responsibility for a privacy issue of the user
caused by using the Secure Watermark feature.
To Next Page
Loading...
Need help?
General
