4 Fax
220
Fax
4
Original Size (Specifying the Scan Size for the Original)
You can specify the scan size for fax transmission.
Use this feature when a document is a non-standard size, or when you want to scan a
document at a size different from the original size. You also can add margins, or delete
unwanted margins.
You can change the default values for buttons other than [Auto Detect] in the System Administration mode. For information
on how to change the default values, refer to "5 Tools" > "Fax Service Settings" > "Original Size Defaults" in the Administrator
Guide.
1 Select [Original Size].
2 Select any option.
îš„ Auto Detect
Detects the document size automatically.
Note • If the document size cannot be detected automatically, a screen to enter the document size
appears.
The document sizes that can be automatically detected depend on [Paper Size Settings] in the System Administration mode.
For information on [Paper Size Settings], refer to "5 Tools" > "Common Service Settings" > "Other Settings" > "Paper Size
Settings" in the Administrator Guide.
îš„ Standard Size
Select the original size from preset sizes.
You can change the sizes displayed on the screen. For more information, refer to "5 Tools" > "Fax Service Settings" > "Original
Size Defaults" in the Administrator Guide.
Document Feeder Document Glass
Auto-detectable
Document Sizes
B5, B5 , B4, A5, A5 , A4,
A4 , A3, 8.5 x 11",
8.5 x 11" , 11 x 17", 16K ,
8K
B6, B5, B5 , B4, A6, A5, A5 ,
A4, A4 , A3
To Next Page
Loading...
Need help?
General
