Power Source
73
Product Overview
2
Power Source
The machine is provided with the push-button power switch and the main power switch.
îš„ Push-button power switch
To use the machine, press the push-
button power switch to switch its power
on. You can start operations after the
machine warms up.
îš„ Main power switch
Press the main power switch to the [ ]
position. The <Main Power> indicator
goes out on the right side of the control panel, and the machine powers off. Do not switch
the main power off except when you connect a cable to the machine or clean the machine.
Switching off the main power may erase the data in the memory when using the Fax service.
Switching the Main Power On
The following describes how to switch the main power on.
Important • Do not switch off the main power immediately after switching on the main power. This may
damage the hard disk and the memory or cause a machine malfunction.
1 Make sure that the power cord is plugged in correctly.
2 Open the front cover.
3 Press the main power switch to the [ | ] position
to switch the main power on.
The <Main Power> indicator lights up on the
control panel.
4 Close the front cover.
Push-button
power switch
Main power
switch
To Next Page
Loading...
Need help?
General
