Layout Adjustment
221
Fax
4
Mixed Size Originals (Scanning Different Size Documents Simultaneously)
You can scan documents of various sizes simultaneously and send faxes of the
corresponding sizes or of one selected size. To use this feature, load the documents in the
document feeder.
Important • Load documents in landscape orientation. However, always load A5 and B5 documents in portrait
orientation so that the machine can detect the size of the documents automatically.
• When loading documents, align the top left corners of the documents properly. Otherwise, a paper
jam may occur.
• The recommended document size combinations are A4 portrait and A3 landscape, or B5 portrait
and B4 landscape. If another combination of document sizes is used, the documents can be fed at
an angle and may not be scanned properly.
Note • Be sure to set [Original Size] to [Auto Detect] on the [Layout Adjustment] screen, when using the
Mixed Size Originals feature.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
1 Select [Original Size].
2 Confirm that [Auto Detect] is selected, and
select [Save]. If [Auto Detect] is not selected,
select [Auto Detect] and then [Save].
3 Select [Mixed Size Originals].
4 Select [On].
îš„ Off
Select this option when all documents are of the
same size.
îš„ On
When scanning documents of different sizes,
the machine automatically detects the size of each document.
To Next Page
Loading...
Need help?
General
