Fuji Xerox ApeosPort-V 4070

Operations during Faxing
177
Fax
4
Operations during Faxing
This section describes the available operations during faxing. The following shows the
reference section for each operation.
Stopping the Fax Job...................................................................................................................................................................177
Previewing the Read Images during a Fax Job .....................................................................................................................178
Changing the Scan Settings ......................................................................................................................................................181
Stopping the Fax Job
To cancel scanning a fax document, use the following procedure.
1 Press either the <Stop> button on the control
panel or [Delete] on the touch screen.
2 Select [Delete].
 If [Delete] does not appear on the screen:
1 Press the <Job Status> button.
123
4
56
789
0#
C
<Stop> button
123
4
56
789
0#
C
<Job Status> button