Layout Adjustment
129
Copy
3
1 Select any option.
îš„ Off
Does not shift the position of document image.
îš„ Auto Center
Shifts document images so that they are placed
in the center of paper.
Specify the amounts of the top and bottom, and left and right margins in the range from 0
to 50 mm in 1 mm increments.
îš„ Corner Shift
Shifts document images so that they are placed at an edge or corner of paper. You can
select from 8 shift directions.
Specify the amounts of the top and bottom, and left and right margins in the range from 0
to 50 mm in 1 mm increments.
îš„ Margin Shift
Allows you to specify the amounts of the top and bottom, and left and right margins in the
range from 0 to 50 mm in 1 mm increments.
Invert Image (Making Reversed Copies of Images)
This feature allows you to reverse the left and right sides of the document image or to create
a negative image of the document when making copies.
Note • When [Negative Image] and [Edge Erase] are set simultaneously, the edge erase area turns to white.
1 Select [Invert Image]. l
2 Select any option.
îš„ Mirror Image
Reverses the left and right sides of the
document image.
îš„ Negative Image
Reverses the density (contrast) of the
documentimage.
Original Orientation (Specifying the Orientation of Loaded Documents)
This feature allows you to specify the orientation of a document so that the machine can
identify the top of the document.
Note • If the [Original Orientation] setting differs from the actual document orientation, the machine may
not detect the top of the document correctly.
To Next Page
Loading...
Need help?
General
