Copy
109
Copy
3
Copy
You can select [Copy] or [Simple Copy] on the Services Home screen to set the features for
the Copy service.
This section describes the features you can select on the [Copy] screen. The following shows
the reference section for each feature.
Reduce/Enlarge (Making Enlarged/Reduced Copies)..........................................................................................................109
Paper Supply (Selecting the Paper for Copying) ..................................................................................................................112
2 Sided Copying (Making 2 Sided Copies) .............................................................................................................................115
Original Type (Selecting the Document Type) ......................................................................................................................115
Copy Output (Specifying Finishing Options) .........................................................................................................................115
Pages per Side (Copying Multiple Pages onto One Sheet).................................................................................................115
Lighten/Darken (Adjusting the Copy Density) ......................................................................................................................115
You can customize the layout of the features displayed on the [Copy] screen. For more information, refer to "5 Tools" > "Copy
Service Settings" > "Copy Tab - Features Allocation" in the Administrator Guide.
1 Select [Copy] on the Services Home screen.
2 Select a feature on the [Copy] screen.
Reduce/Enlarge (Making Enlarged/Reduced Copies)
This feature allows you to select a copy ratio to enlarge or reduce the size of copies.
1 Specify a copy ratio. You can use the numeric
keypad to specify a value, or [+] and [-] to
specify reduction/enlargement ratios directly.
îš„ 100%
Copies at the same image size as the original
document.
îš„ Auto %
Automatically determines the copy ratio based on the document size and the paper size
specified in [Paper Supply], and copies the document to fit into the paper.
Note • This cannot be selected together with [Auto Select] under [Paper Supply].
To Next Page
Loading...
Need help?
General
