E-mail
285
Scan
5
-[Type 2]
The buttons 1 to 60 are used for address numbers and correspond to the registered address
numbers 0001 to 0060, while the buttons 61 to 70, M01 and M02 are used for stored programs
and they correspond to the registered stored programs 1 to 12.
• One-touch button is available when the machine displays the [E-mail] screen, the [Advanced
Settings] screen, the [Layout Adjustment] screen, or the [E-mail Options] screen. The button is not
available when the pop-up menu is displayed, or when the other screen is displayed after an item is
selected.
When you press a one-touch button when the machine displays the [Advanced Settings] screen, the
[Layout Adjustment] screen, or the [E-mail Options] screen, the screen switches to the [E-mail] screen
automatically.
1 Press a one-touch button. Confirm that the recipient (e-mail address) specified with the
one-touch button is displayed on the touch screen.
Important • The one-touch buttons have a sensor to detect which page of one-touch buttons (1 - 24, 25 - 48, or
49 - M02) is currently open. Before pressing a one-touch button, turn over the one-touch panel
completely, and take off your hand from the panel. Do not press the button while you are turning
over the panel.
• Do not place any objects near the one-touch buttons, nor spill any liquid over them.
Note • Turn the one-touch panel over to press the one-touch buttons 25 and above.
• If you have entered an incorrect value, select the recipient (e-mail address) displayed on the touch
screen, select [Remove] on the pop-up menu, and enter the correct value.
New Recipient (Specifying an E-mail Address)
You can specify the recipient’s e-mail address using the keyboard. Enter a part of the address
and search the Address Book, or directly enter the full address.
Entering a Part of the E-mail Address
1 Select [New Recipient].
To Next Page
Loading...
Need help?
General
