3 Copy
108
Copy
3
1 Select [2 Pages per Side].
1 Staple
This feature allows you to select whether to staple copied outputs at the top left corner.
The number of sheets that can be stapled is 2 - 50 (when 80 gsm paper is used). If the C3
Finisher Staple Unit 65 Sheets (optional) is installed, the maximum number of sheets that
can be stapled is 65 (when 90 gsm paper is used and thickness of bundled paper is 7.2 mm
or less). Available paper types are: Plain (60 - 105 gsm), Reload (60 - 105 gsm), Recycled (60
- 105 gsm), Punched (60 - 105 gsm), Letterhead (60 - 105 gsm)*, Pre-printed (60 - 105 gsm),
Lightweight (56 - 59 gsm), Heavyweight (106 - 169 gsm), Extra Heavyweight (170 - 216
gsm), Bond (170 - 216 gsm), and Custom Paper 1 to 5.
* : Only when the HCF B1 is installed
Note • This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
1 Select [1 Staple].
To Next Page
Loading...
Need help?
General
