Error Code
353
Problem Solving
14
016-736
O [Cause] Any data cannot be saved in the forwarding destination
directory.
[Remedy] Take one of the following actions:
1. Check the free space of the forwarding destination disk.
2. Check to see whether you have privileges for the
forwarding destination directory.
3. Delete a ".LCK" file from the forwarding destination
directory.
016-737
O [Cause] Any data cannot be saved in the forwarding destination
directory.
[Remedy] Delete ".LCK" file from the forwarding destination
directory.
016-741
016-742
016-743
016-744
016-745
O [Cause] An error occurred during the update process of the
machine.
[Remedy] Turn the machine off and on. If the problem persists,
contact our Customer Support Center or your dealer.
016-746
O [Cause] An unsupported feature is included in the received PDF.
[Remedy] Print using a print driver.
016-747
O [Cause] The memory became insufficient when using both the
[Repeat Image] and [Annotations] features
simultaneously.
[Remedy] Take one of the following actions:
z
Use the bigger annotation image size.
z
Use less [Repeat Image].
z
Increase memory.
016-748
O O O O [Cause] Unable to print due to insufficient hard disk space.
[Remedy] Reduce the number of print pages by dividing up the print
data or printing one copy at a time when making multiple
copies.
016-749
O [Cause] For a print job:
1. The print language received from the print driver is
unsupported by this machine.
2. A PDF file was to be printed on the PDF-unsupported
model using ContentsBridge.
For printing of a document received by Internet Fax:
3. The print language received from the print driver is
unsupported by this machine.
[Remedy] For Cause 1: Use the machine’s print driver for printing. If
the problem persists, contact our Customer Support
Center.
Note•An optional package is necessary for some print languages
such as PostScript. For more information, contact
our Customer Support Center.
For Cause 2: Do not use ContentsBridge to print a PDF
file.
For Cause 3: Request the sender to send Internet Fax
using a print language supported by this machine.
Error Code
Category
Cause and Remedy
CPFSMO
* If the error persists after following the listed solution, contact our Customer Support Center. The contact number is
printed on the label or card attached on the machine.
To Next Page
Loading...
Need help?
General
