Operation
► Plug the receiver into a free USB port on your computer.
The radio connectio
n will be established automatically.
Re-establishing the radio connection to the
KeyboardSetifrequired
Normally a radio connection code is generated automatically and the Keyboard Set
is then immediately ready for operation. When the connection h as s uccessfully been
established the LED on the re ceiver lights up green. The LEDs on the keyboard and
mouse light up red if the battery voltage falls below 2.2 V.
If the connection is not established automatically, or if it bre aks dow n, pro ceed as follows:
► Unplug the receiver from your computer and plug it in again.
► Place the mouse at a distance no greater than 30 cm from the receiver.
► Keep the left mo use button pressed for five seconds.
The LED on the receiver will flash green 4 times to indicate th at the connection
to the mouse has been established successfully.
► Keep the E sc ke y on the keyboard pressed for five seconds.
Esc
.
The LED on the receiver will flash green 4 times to indicate th at the connection
to the keyboard has been established successfully.
AMILO Desktop Operating Manual, edition 3 23
To Next Page
Loading...
Need help?
General
