Getting started
Connecting a monitor
Only attach the monitor to your device when switched off.
► Follow the instructions contained in the monitor manual to prepare the monitor
for ope ration (e.g . connecting cables).
Monitor
► Connect the data cable of the monitor into the required monitor port of your device.
You may only then c onne ct the mains cable of the monitor to the monitor socket
of the de vice if the rate d current of the monitor (e.g. 1,2 A - see documentation
for the monitor) is less than the maximum permitted power output of the monitor
socket of the device (e.g. 1,5 A - see type plate on the PC).
► Depend ing on the configuration level of your device, plug t he monitor power cable into
a grounded m ains outlet or into the monitor socket on the device.
Connecting the mouse
You can connect a US
B mouse or a PS/2 mouse to your device.
Mouse,Connecting,
Connecting a USB m
ouse
► Connect the USB mouse to one of the USB ports on the device.
USBport,USBport
Connecting a PS
/2 mouse
The PS/2 m ou se is only detected by the d evice if you connect th e mouse when
the device is switched off and then switch the device on again.
► Connect the PS/2 mouse to the PS/2 mouse po rt of the device.
PS/2mouse,Con necting,PS/2mouse,
► Switch your device on again.
Fujitsu 19
To Next Page
Loading...
