System expansio ns
Installing and removing heat si
nks
Removing the heat sink
► Remove the casing cover (see Chapter "Remov ing the casing cover", Page 35).
► Disconnect the fa n cables from the mainboard.
1
a
2
► Pull the catch o
f the hood in the direction of the arrow (1) (identified with the label "PULL").
► Slightly tilt the cowl and lift it out of the casing (2). In doing so, take care that
the pins (a) release from the openings on the casing.
3
4
► Undo the screws on the heat sink (3).
► Lif
t the heat sink out of the casing (4).
Fujitsu 75
To Next Page
Loading...
