System expansio ns
Installing a board carrier
d
3
4
► Position the display adapter su pport on the board (3).
► Guide both ends of the display adapter su pport thro ugh the corresponding
opening on the riser card (4).
► Make sure that the display adapter support (d) engages on the board.
5
1
e
e
f
► Place the board carrier in the lateral guides on the casing (e) and press the board carrier into the
casing in the direction of the arrow (5) until the riser card is fully inserted in the mainboard socket.
► Make sure that the display adapter support (f) engages on the met al tab.
► Plug in the cables at the board(s) and at the mainboard. Make sure the polarity is correct.
► Fit the casing cover back onto the casing (see Chapter "
Reattaching the casi ng cover.", Page 36).
Fujitsu 67
To Next Page
Loading...
