Fujitsu CELSIUS J550 - Installing and Removing Expansion Boards

System expansions
Removing an M.2 module
► Remove the casing cover (see chapter "Removing the casing cover" , Page 35).
► Fold out the drive cage (see chapter "
Opening the drive cage", Page 46).
a
1
2
b
► Undo the screw (1)
.
► Pull the M.2 module (b) slightly at an angle in the direction of the arrow (2) and out
of the slot (a) on the m ainboa rd and remove it fro m the casing.
► Fold the drive
cage into the closed position again (see chapter "
Closing the drive cage", Page 47).
► Fit the casing cover onto the casing again (see chapter "
Reattaching the casing cover.", Page 36).
If necessary, you must ad just the entry for the M.2 module accordingly in the BIOS Setup.
60 Fujitsu