Operation
Indicators on the device
Indicators,Device
The indicators are on the front of the casing. Which indicators a re available on your
device depends on the configuration level you have selected.
2
3
1
4
No. Indicato r Description
1 Drive indicator
(depending on device
variant):
The indicator lights up when th e CD-ROM o r DVD drive in the
device is accessed. Never under any circumstances remove the
CD/DVD while the indicator is lit.
2 Hard disk indicator The indicator lights up when the hard disk drive in the device
is being accessed.
3 Power-on indicator
Caution: In e
nergy-saving mode, the device must not be
disconnecte
d from the mains supply, as this could lead to loss
of data.
• The indica
tor is illuminated:
The device is switched on.
•Theindic
ator is flashing:
The device is in energy-saving mode. After being switched on
with the ON/OFF switch, the device powers up or returns to the
state it was in before it entered energy-saving mode.
•Theind
icator is not lit:
The device is switched off.
4
Indicator for optional
components, e.g.
SmartCard reader
(depending on th e
device variant)
The indicator ligh ts up when optional components, e.g. SmartCard
reader, are a ccessed.
24 Fujitsu
To Next Page
Loading...
