Operation
Property and data protection
Propertyprotectio nDataprot ectionSecuritym easures
Software functions and mechanical locking offer a broad range of functions for protecting your device
and your pe rsonal data against theft and unauthorised access. You can also combine these functions.
Mechanically protectin g and lock ing the casing
Your device has provision f or a security lock (4). Using the security lock provision and
the Kensington Lock c able (steel cable, accessory) you can protect your device against
theft. Please consult the manual for your Kensington Lock.
To p revent unauthorised persons from opening the casing, the casing can be sealed (1) or it can
be secured w ith a padlock. To do this, feed the sealing cha in through the eye (2) and seal the
chain with the lead seal. Alternatively, pass a suitable padlock through the eye (2).
Lead-sealingAnti-theftprotectionSecurityLockChainPadlockProtect
2
1
2
3
4
1 = Lead seal
2 = Eye for pad lock / lead-seal (diameter 6 mm)
3 = Casing lock (optional)
4 = Provision for security lock
With the casing lock (3) you can mechanically lock the ca sing to prevent unauth o rise d persons
from opening it. The keys can be found at the rear of yo ur device.
In addition to the casing lock, an open and a closed lock a re also illustrated.
• Key turned towards the closed lock: The device is locked.
• Key turned towards the open lock: The device is not locked.
Fujitsu 27
To Next Page
Loading...
