Fujitsu CELSIUS J550 - Reinstalling a Slot Cover

87 pages

To Next Page

To Previous Page

System expansions

Reinstalling a slot cov er

► Slide the slot cover into the slot (2).

► Fasten the screw (c).

► If you have removed a second board, install the second slot cover in the same way.

66 Fujitsu

Main Page

Table of Contents7
Your CELSIUS11
Validity of the Reference Manual11
Notational Conventions12
Ports and Operating Elements13
Front13
Rear14
Important Notes15
Safety Information15
Transporting the Device15
Cleaning the Device16
Energy Saving, Disposal and Recycling16
Getting Started17
Unpacking and Checking the Delivery17
Steps for Initial Setup17
Setting up the Device18
Vertical Operating Position with Feet (Optional)18
Connecting the Device to the Mains Supply20
Connecting External Devices21
Ports on the Device22
Connecting a Monitor23
Connecting the Mouse23
Connecting the Keyboard24
Connecting External Devices to the Parallel (Optional) or Serial Port24
Connecting External Devices to the USB Ports25
Switching on for the First Time: Installing the Software25
Switch on the Monitor and the Machine26
Installing the Software26
Operation27
Switch the Device on27
Switching off the Device27
Procedure in an Emergency27
Indicators on the Device28
Keyboard29
Important Keys and Keyboard Shortcuts29
Settings in BIOS Setup30
Property and Data Protection31
Mechanically Protecting and Locking the Casing31
BIOS Setup Security Functions32
Access Authorisation Via Smartcard32
Operating the Smartcard Reader (Optional)32
Problem Solutions and Tips33
Help if Problems Occur33
Troubleshooting33
Power-On Indicator Remains Unlit after You Have Switched on Your Device33
The Device Cannot be Switched off with the On/Off Switch34
Monitor Remains Blank34
No Mouse Pointer Displayed on the Screen35
Time And/Or Date Is Not Correct35
Smartcard Reader Is Not Recognised35
Smartcard PIN Forgotten36
Error Messages on the Screen36
Installing New Software36
Tips36
System Expansions37
Information about Boards38
Removing the Casing Cover39
Reattaching the Casing Cover40
Overview of Drive Bays and Drives in Your Device41
Changing the Drive Cover42
Installing and Removing an Accessible Slimline Drive in the Upper Bay (Optional)45
Installing the Drive Plate for the Slimline Drive45
Installing a Slimline Drive47
Removing a Slimline Drive48
Opening and Closing the Drive Cage50
Opening the Drive Cage50
Closing the Drive Cage51
Installing and Removing 2½ Inch Drives in a 3½ Inch Adapter52
Installing 2½ Inch Drives in a 3½ Inch Adapter52
Removing 2½ Inch Drives from a 3½ Inch Adapter54
Installing and Removing Drives in the Lower Bay (Optional)55
Installing and Removing a 3½ Inch Drive or a 3½ Inch Adapter55
Installing and Removing a 2½ Inch Drive (Screw Fastened)58
Installing and Removing Drives in the Middle Bay (Optional)60
Installing a 3½ Inch Drive60
Removing a 3½ Inch Drive62
Installing and Removing an M.2 Module63
Installing an M.2 Module63
Removing an M.2 Module64
Installing and Removing Full High Boards65
Removing a Board Carrier66
Removing a Slot Cover67
Installing a Board68
Removing Boards69
Reinstalling a Slot Cover70
Installing a Board Carrier71
Installing and Removing WLAN Antennas73
Installing External WLAN Antennas73
Removing External WLAN Antennas74
Installing a Serial Port75
Installing a Parallel Port76
Installing and Removing Heat Sinks79
Removing the Heat Sink79
Installing the Heat Sink81
Mainboard Expansions82
Upgrading Main Memory82
Processor, Replacing82
Replacing the Lithium Battery83
Technical Specification84

Fujitsu CELSIUS J550 - Reinstalling a Slot Cover

Table of Contents

Related product manuals