System expansio ns
Installing a slimline drive
• The drive plate is attached to the slimline drive (see chapter "In stalling the
drive plate for the slimline drive", Page 41).
• A suitable drive cover is mounted (see chapter "
Changing the drive cover", Page 38).
1
2
1
► Slide the sliml
ine drive into its bay in the direction of the arrow (1) until it engages in place.
► Connect the cables to the slimline drive and to the mainbo ard. Make sure the polarity is correct.
► Fit the casing
cover back onto the casing (see C hapter "
Reattaching the casi ng cover.", Page 36).
If necessary,
you must adjust the entry for the drive accordingly in the BIOS Setup.
Fujitsu 43
To Next Page
Loading...
