System expansions
Installing a board
b
c
6
► Slide the board in
to the riser card of the board carrier (6) until it engages.
If present, the additional board r etaining clip (b) engages.
► Fasten the scre
w(c).
► If necessary, connect th e cables to the board.
► Ifyouwishtoi
nstall a second board, insta ll the secon d board in the same way.
If you have in
stalled or removed a board, please check t he relevant PCI
slot setting
sintheBIOS Setup. If necessary, change the settings. Further
information
is provided in the PC I board documentation.
64 Fujitsu
To Next Page
Loading...
