System expansio ns
Installing and removing an acce
ssible slimline
drive in the upper bay (optional)
Installing the drive plate for the slimlin e driv e
To use the locking function of the accessible slimline drive, you must fit the asso ciated drive plate
on the slimline drive before installing the drive in the casing. Procee d as follows:
The drive plate is located in the upp er bay for the slimline drive.
► Remove the casing cover (see Chapter "
Removing the casing cover", Page 35).
a
1
1
2
► Press th e clip in the direction o f the arrow (1 ).
► Remove the drive plate ( a) from the upper bay (2).
Fujitsu 41
To Next Page
Loading...
