System expansions
Removing a board carrier
► Remove the casing cover (see Chapter "Removing the cas ing cover", Page 35).
2
1
► To release any display adapter support that may be present on the mainboard,
press it in the direction of the arrow (1).
► Disconnect the
cables connected to the board(s).
► Pull the board carrier out of the c asing in the direction of the arrow (2).
3
4
3
► Press together both ends of the display adapter support (3) and release the
display ada pter support from the riser card (4).
62 Fujitsu
To Next Page
Loading...
