Fujitsu CELSIUS J550 - Removing 2½ Inch Drives from a 3½ Inch Adapter

System expansions
Removing 2½ inch drives from a 3½ inch a dapter
1
1
2
3
► Press the Ea syCha
nge rails on the drives slightly together (1) and pull the drives with
the EasyChange r
ails one after the other out of the adapter (2, 3).
a
► Pull the EasyChange rails off the first drive.
► Repeat the step for the second drive.
► If you no longer need the EasyChange rails, secure them again at the ir location in the adapter.
50 Fujitsu