System expansions
Reattaching the casing cover.
In o rder to make it easier to pu t on the casing cover, there are two reference lines
(c) imprinted on the board clip, which will assist you when positioning.
2
1
b
a
c
► Place the casing cover onto the casing (1), use the reference line (c) for positioning
and slide the casing cover in the direction of the arrow (2) until it reaches a stop. When
doing so , make sure that the eye (b) fits into the opening (a).
Thecasingcov
er will click into place automatically, without any need to
move the retai
ning mechanism.
► Connect the cables to the device.
36 Fujitsu
To Next Page
Loading...
