Getting started
Connecting external devices to the USB ports
USBdevices,USBport,Externaldevices,Devices,
You can connect a w ide range of external devices to the USB port s (e.g.
printer, scanner, mouse or keyboard).
USB devices are hot-pluggable. This means you can connect and disconnect
USB cables while your device is switched on.
Additional information can be found in the documentation for the USB devices.
► Connect the data cable to the external device.
► Connect the data cable to one of the U SB ports on your device.
Device drivers
External USB devices which you connect to one of the USB ports don’t usually
need their own drivers because the software required is already included in
the operating system. If the device requires separate software, please follow
the instructions in the manufacturer’s docume ntation.
Switchingonforthefirst time: installing the software
Installing,Software,Installing,
Once the installation ha s been started the device m ust not be switched
off, unless the installation has been completed.
During installation, the device may only be rebooted when you are requested to do so!
The installation will otherwise not be carried out correctly and the contents
of the hard disk must be completely restored.
If the device i
s integrated into a network, the user and server de tails as well as
the network pr
otocol are required during the software installation.
Contact your
network administrator if you have any questions about these settings.
When you swi
tch on the device for the first time, the supplied software
is installe
d and configured. Plan a reasonable amount of time for this,
as this pro
cess must not be interrupted.
Fujitsu 21
To Next Page
Loading...
