System expansions
5
4
► Secure the parallel port with the scre ws (4).
► Connect the cable t
o the mainboard (5).
► Re install the board carrier in the casing (see chapter "
Install ing a board carrier", Page 67).
► Refit the casing co
ver on the casing (see chapter "
Reattaching the casing cover.", Page 3 6).
To re move, perf
orm th e above steps in reverse order. To comply with the electromagnetic
compatibility
(EMC) regulations, secure the metal plate at the installation o pening again.
74 Fujitsu
To Next Page
Loading...
