System expansio ns
1
a
5
► Slide the drive plate (a) into the upper bay (5) again as shown, until it e ngages.
It is essential to ensure that the drive plate is installed in the correct
installation direction (see i llustration).
► If you are not in
stalling a new slimline d rive, change the d rive cover (se e
chapter "
Chang
ing the drive cover", Page 38).
► Fit the casing cover back onto the casing (see Chapter "
Reattaching the casi ng cover.", Page 36).
If necessary, y ou must adjust the entry for the drive a ccord ingly in the BIOS Setup.
Fujitsu 45
To Next Page
Loading...
