System expansio ns
Removing a drive
► Remove the casing cover (see Chapter "Remov ing the casing cover", Page 35).
► Fold out the drive cage (see chapter "
Opening the drive cage", Page 46).
► Disconnect an y cables connected to the drive.
3
1
1
2
► Slightly press together the EasyChange rails on the drive (1 ).
► Push the drive a few centimetres out of the bay in the direction of the arrow (2).
► Pull the drive completely out of the bay in the direction o f the arrow (3).
► Pull the EasyChange rails off the drive.
► If y
ou no longer need th e EasyChange rails, secure them again in the lower bay.
► Fold the drive cage into the closed position again (see chapter "
Closing the drive cage", Page 47).
► Fi
t the casing cover back onto the casing (see Chapter "
Reattaching the casi ng cover.", Page 36).
Fujitsu 53
To Next Page
Loading...
